When laying out the loading crane attachments, it is required to observe - apart from the necessary stability - the connection between loading crane and chassis (item 3.4).

Loading crane and vehicle attachment are to be arranged in such a way, that the permitted axle loads are kept in every loading state.

Loading crane attachment behind the driver’s cab

• Maximum crane-load moment: 25 KNm


• Moments of resistance for mounting-frame side rails: W_x = 45cm³ (45cm3 (profile dimensions according to diagram under item 3.3)


• Determine the flatbed length depending on the loading-crane attachment.


• Due to the load distribution, it may be necessary to lengthen the chassis.


• A permission is required for deviating crane attachments.


• The necessary supporting devices should be hydraulically actuated.


• Do not lift the vehicle with the supporting device (chassis may be damaged)


• Crane attachments and supporting devices must neither impair other equipment, modules, units, etc., nor the associated functions.


• Loading crane attachments must meet the requirements of the regulations for the prevention of industrial accidents and the EC Machinery Directive.