4.5 Retrofitting of Standard Seats
E. Retrofitting of Standard Seats in the Passenger Compartment/Boot Space
The floor layout of the box-type delivery van and station wagon is identical and is suitable for the subsequent mounting of standard seats (wheel base 2,920 mm: 2 rows of seats/wheel base 3,320 mm: 3 rows of seats)
The retrofitting of standard seats according to the requirements of the appropriate series type is only permitted with the upgrading equipment/accessories.
It is possible to realise deviating seat arrangements and wooden floor plates combinations (to a limited extent).
It is also permitted to install aluminium locking rails on the rubber/carpet or to install a latch for fixing wheelchairs (to be inserted in a wooden floor plate).
Generally, it is not permitted to upgrade our standard rotational seats with lap belts (to be performed by the attachment manufacturer, for example). In this connection, so far no tests have been carried out.
Detailed information on scope available on request.
Note:
a) Fastening lugs on the boot-space floor of the station wagon/box-type delivery van are not available for PR-No. 6B0! (concerns only the home market; for exports: add option).
b) If seats are missing in the passenger compartment, the heater core will also be missing there (the so-called 2nd heater core).
In addition to the 2nd heater core, vehicles with TDI engine have another add-on heater (a burner keeping the heating circuit at approx. 85°C). If the 2nd heater core is not available, then also the add-on heater will be missing! Retrofitting the 2nd heater core and the add-on heater costs approx. DEM 4,000 per vehicle!
A maximum of 3 seats/row of seats is possible. In general, the three-point seat belts of the external seats (left/right) must be linked to the fastening points of the side walls which are provided for that purpose. Integrated three-point seat belts at the seats are generally not permitted. Lap belts on all seats are technically feasible, provided that the appropriate national regulations permit this option.
* The side walls of the box-type delivery van are not prepared for the installation of three-point seat belts.
Retrofitting possibilities are available on request. | |
|
