The damping characteristic, brake system and steering should not be modified. Exceptions must be authorised by Volkswagen AG before conversion measures are carried out.

For modifications to parts that generate noise (e.g. engine, tyres, exhaust, ...), carry out noise insulation measures in accordance with EC guidelines. The perm. values should not be exceeded.

For modifications to the vehicle body in the area of the fuel tank, this must first be removed.

Changing the steering and braking forces for vehicle conversions for disabled persons is not possible.

For more information about the conversion, refer to:

• Dimensions and weights (chap. 2.1)
• Chassis dimension drawings (chap. 2.4)
• Maximum dimensions (chap. 2.6)
• Standard attachment points for special bodies (chap. 2.7)
• Roof racks, perm. roof loads (chap. 3.1)
• Wings and wheel houses (chap. 3.2)
• Mounting of additional units (chap. 3.3)
• Raising the vehicle (chap. 3.7)
• Vehicle battery protection (chap. 3.8)
• Fitting power take-offs (chap. 3.9)
• Brake system (chap. 3.11)
• Electrical connection (chap. 3.15)
• Turn signals in vehicles with excess width (chap. 3.18)
• Side wall cut-outs, installation of windows (chap. 4.1)
• Roof cut-outs (chap. 4.2)
• Cut-outs in the rear cab wall (chap. 5.2)
• Drilling on the chassis frame (chap. 5.3)
• Welding on the chassis frame (chap. 5.4)
• Wheelbase extensions and overhang extension (chap. 5.5)
• Subframe, mounting frame (chap. 5.6)
• Bodies with a high centre of gravity (chap. 5.7)