3.6 Trailer hitches/ space allowance in accordance with DIN 74058
Only the trailer hitches authorised by the factory should be installed for towing. As an option, the following trailer hitches can be ordered from the factory:
Ball head type - order number:
1D1 (in combination with ESP including trailer stabilisation)
Towing capacity max. 750 kg unbraked and 2000 - 2500 kg braked (depending on engine size) at 12% gradient rise.
1D2 (in combination with ESP including trailer stabilisation)
As above but removal and lockable
The permissible drawbar load is 100 kg.
The maximum permissible gross pulling weight, indicated in the vehicle documents, should not be exceeded. The actual weight of the trailer load should ot exceed the max. perm. weight of the towing vehicle.
If a trailer hitch is retrofitted
- the relevant country regulations must be observed
- the necessary clearance of the trailer behind the towing vehicle should be assured (DIN 74058)
- the vehicle should be examined for roadworthiness at a relevant technical inspection centre
Warning:
- Securing points are provided in the vehicle longitudinal members.
- If the body is extremely low or there is an excessive overhang, and also following overhang extensions, the use with factory fitted trailer hitches should be ruled out.
- The max. perm. towing weight (depending on engine) should be determined before retrofitting.
Space allowance in accordance with DIN 74058
Further details should be gleaned as required.
Checking
The checking of dimensions and angles must be carried out using suitable length and angle measuring instruments.
For more information about the conversion, refer to:
