The necessary clearance for the wheels, including snow chains, must be observed. The dimensions given in the chassis diagrams is the minimum distance from the upper edge of the longitudinal member to the wheel housings.

For more information about the conversion, refer to:

• Dimensions and weights (chap. 2.1)
• Chassis dimension drawings (chap. 2.4)
• Maximum dimensions (chap. 2.6)
• Standard attachment points for special bodies (chap. 2.7)
• Roof racks, perm. roof loads (chap. 3.1)
• Mounting of additional units (chap. 3.3)
• Raising the vehicle (chap. 3.7)
• Vehicle battery protection (chap. 3.8)
• Fitting power take-offs (chap. 3.9)
• Brake system (chap. 3.11)
• Electrical connection (chap. 3.15)
• Turn signals in vehicles with excess width (chap. 3.18)
• Side wall cut-outs, installation of windows (chap. 4.1)
• Roof cut-outs (chap. 4.2)
• General notes on modifying standard vehicles (chap. 4.5)
• Cut-outs in the rear cab wall (chap. 5.2)
• Drilling on the chassis frame (chap. 5.3)
• Welding on the chassis frame (chap. 5.4)
• Wheelbase extensions and overhang extension (chap. 5.5)