2.6 Maximum dimensions

The dimensions of the vehicle chassis can be gleaned from the diagrams. To aid your conversion plans, the chassis dimensions are given in a scale of 1:20 and 1:10.
If uprated springs, comfort springs or tyre sizes that deviate from the standard specifications are fitted, the vehicle and frame heights can change considerably from the base level. If this equipment is to be used, we ask you to please take this fact into consideration.

Important note

The minimum distance between cab and body should be 30 mm.
The rear overhang of the custom body should not exceed 43% of the wheelbase.

: Due to this restriction in length, the following custom body outer lengths should not be exceeded:

	Wheelbase	Standard body length, inner	max. custom body length with 43% rear overhang
Chassis with cab	3.000 mm	2.539 mm	2.692 mm
Chassis with cab	3.400 mm	2.939 mm	3.264 mm
Chassis with double cab	3.400 mm	2.169 mm	2.212 mm

The outer width of the cab is 1,904 mm. If standard type exterior mirrors are used, the body width should not exceed 2,200 mm.

When ordering the vehicle, note the planned body width with regard to the standard mirrors.

For more information about the conversion, refer to:

Note: Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of up-to-date data on body guidelines.

Volkswagen.deIVW-Nutzfahrzeuge.de