The SCR system consists of a tank, lines and a metering valve and are an optimised electrical-hydraulic unit. The location of the tank and the heated lines and their relative position to the vehicle may not be changed.

• For enclosed bodies (panel van/window van) there is only one location for all wheelbases.
• For open bodies (chassis/double cab) there are different locations for each wheelbase (the distance to the rear axle is always the same).

Prerequisites for chassis and double cab:

• Filling of tank must be guaranteed.
• BFor Luton and camper bodies, extending the filler neck to a max. 300 mm is permitted. The leakproofness is presupposed. The specified capacities must not be exceeded.
• Along with the filler neck, the pump unit and the metering unit must be accessible for repairs.

For open bodies where there is a location conflict, under certain circumstances it is possible to relocate the SCR tank to the left side of the vehicle (not for short wheelbase). Detailed information is available from Volkswagen Commercial Vehicles upon request. Please submit your request, along with body construction details, via online contact form.

 das Online-Kontaktformular.